A hospital in Jiangyin ordered a ZJR series vacuum emulsifier in YK. The device is used for the preparation of hospital ointments. This is not the first time a customer has ordered a device from us. In 2017, the customer ordered an emulsifier for the first time from YK. A year of use, the material experience is good. Whether it is from the aspect of operation cleaning or the function configuration of the machine, the manager feels satisfied. Today, the hospital has a demand, just come to find Yikai, ordered a 50L vacuum emulsifier.
According to the requirements of the hospital, they chose a ZLR-50 emulsifier with a design volume of 50L and a working volume of 40L. Due to the small amount of blending, there are not many batches. So the customer chose a style without a pre-treatment water tank. At the same time, due to the height limitation of the preparation work room of the hospital, the height of the machine was lowered. When the device reaches the maximum height of the lid, the height of the device is less than the height of the workspace. It is proper to prepare the ointment into the workshop.
The above is the result of the sample of the YK installation and commissioning staff sent out at the hospital test machine. Is it great? The paste is evenly mixed, delicate and stretched, and the skin is spread well. The active ingredients are easily absorbed by the skin. Batch preparation takes less time and the operation is coherent and efficient. The feeding lid is electrically lifted, the feeding is very convenient, and the discharging is also convenient. After the lid is raised, the main pot is poured 120 degrees and poured out. It can also be discharged through the discharge valve at the bottom of the pot, which is very convenient. Cleaning can be done by cleaning the spray ball through the lid. The whole machine is scientifically and rationally designed from the point of view of the processing requirements of the preparation of the ointment.
